6
6
Reset Button
Press this button with a small, thin object (such as a paper clip) to perform a
system reset. When the system resets, the switch will beep and the port LEDs will
flash in succession until the reset is complete.
7
Power LED
Illuminates green to indicate the KVM switch is powered on.
Rear Panel
Features
1
Power Jack
The included power supply connects to the KVM switch here.
2
USB 2.0 Peripheral Port
USB 2.0 devices (flash drives, printers, scanners) can be plugged into this port
and shared among connected computers.
Note:
USB hub functionality is not provided to second- or third-level KVM switches in a
cascade installation.
3
Firmware Upgrade Port
During a firmware upgrade, the included RJ11 to DB9 firmware upgrade cable
connects to the KVM here.
4
Grounding Terminal
When grounding the KVM switch, the grounding wire connects to the KVM here.
5
Console Ports
Your monitor, keyboard, mouse, microphone and speakers plug into these ports.
6
Computer Ports
The DVI/USB KVM cable kits connect from an available set of ports to a computer.
1
4
5
6
2 3
17-10-479-93370A.indb 6
11/17/2017 2:28:58 PM