5
Note: Install the driver on your computer before connecting
the display adapter(s).
1. Insert the driver CD into your computer’s CD-ROM drive.
The setup program should run automatically. If the setup
program fails to start on its own, open the CD and double-
click on the appropriate driver file.
Note:
• If you encounter a User Account Control popup,
choose to allow the installation to proceed. This
may require an administrator’s password. If you
encounter a driver signature dialog box, choose to
continue the installation.
• If a message stating “Display Link software for USB
display adapter is already up to date,” then the
necessary software for this unit is already installed,
and you can proceed to step 5.
2. Follow the prompts that appear to complete the process.
3. When this process is complete, you will need to restart your
computer to finish the installation.
4. After restarting your computer, connect the included USB
cable from an available USB 2.0 or 3.0 port to the display
adapter.
5. Connect your display adapter to a monitor using an HDMI,
DVI or VGA cable, depending on your adapter/monitor
connection type.
2. Installation
14-08-104-9333A6-revB.indd 5
8/13/2014 11:04:00 AM
