Tripp Lite 0DT23008, Quick Installation Manual

Page: 6 / 8

MINI KVM EXTENDER
5
13. Configuration options
Configure the Mini KVM Extender system to:

Work with Unix servers

Input the monitor’s DDC information

Change the Shift hotkey to Ctrl
When you enter the configuration mode by pressing Shift , Tab – as set out below -
all 3 LEDs illuminate. Pressing Esc exits the configuration mode and the LEDs
return to normal.
Note! Press the keys one after the other not all together.
Working with UNIX servers
Configure the system to work with UNIX servers

For HP UX, SGI and Open VMS, press Shift , Tab, U, 1, Esc

For Alpha Unix, press Shift , Tab, U, 2, Esc

For AIX, press Shift , Tab, U, 3, Esc
Display Data Channel (DDC) hotkey
Display Data Channel is a VESA standard for communication between a monitor
and a video adapter
To input the monitor’s DDC information into the Transmitter’s memory, press:
Shift, Tab, D, Esc .
Update the DDC information if you replace the monitor. To do so, repeat the above
hotkey sequence.
Changing the Shift hotkey to Ctrl
You can change the hotkey to Ctrl . Once you do so, replace all the instances of
Shift appearing above to Ctrl .
To change to Ctrl press:
Shift, Tab, C, Esc .
To change back to Shift press:
Ctrl, Tab, S, Esc .