5
4. SPECIFICATIONS
• Identifies 8 individual Remotes (BNC, F, RJ, and Cliplead Types,
total 32 Remotes) by measuring their precision resistance
• AC and +DC test detects voltages above 3 volts
• Display: Bright Red and Green LEDs indicate the test results
• Built in Tone Generator, Warble pitch, approx 9V peak at 800 to
1000Hz
• Continuous Battery Test flashes LED in Tone mode
• Protected against damage up to 120 volts AC/DC (no fuse required)
• Minimum Cable Length: no minimum
• Maximum Cable Length: any length whose total DC resistance is
less than 200 Ohms (see table for some common examples)
• Cables / Wires Tested: Any pair whose total DC resistance is less
than 200 Ohms, and is unconnected to other equipment or
circuitry
• Continuity: Continuity (SHORT) is indicated for resistances of
500 Ohms or less
• OPEN Test: OPEN is indicated for resistances of 10,000 Ohms
or more
• Battery: 9 volt
• Battery life: approx 20 hours continuous use (alkaline battery)
• Size
Main Unit: 2.45"W x 4.5"H (to top of BNC) x 1.25"T (to top of switch)
Carrying Case: 5” (W) x 7.75” (L) x 2.5” (D)
• Weight
Main Unit (with battery): 4.7 oz.
Complete Kit: Approx. 1.25 lbs.
