7 www.triplett.com
UM-POE2000
side of the cable), Reconnecting the PSE to the tester will start auto-
rotate display.
To perform a reset, first unplug the cable from PD side, next unplug
the PSE side cable. Reconnect the PSE side until voltage values are
displayed then connect to the PD to be tested.
The tester cannot measure and test PD alone, it has to be connected
to a PSE first, Once this is done then connect to the PD, after
negotiation process, the tester will start power
Level testing.
**CAUTION**: Before connecting PD to the tester make sure that
the PD to be connected is either a standard PoE powered device
or a non-PoE powered device to avoid damaging a non-PoE
device is damaged by a non-standard passive PoE power.**
