Safety
Use extreme caution when the laser pointer beam is on
Do not point the beam toward anyone's eye or allow the beam
to strike the eye from a reflective surface
Do not use the laser near explosive gases or in other potentially
explosive areas
Features
Quickly indicates the moisture content of materials with Pinless technology without damaging
the surface;
Pin-type probe allows for moisture readings at different penetration levels (3ft/0.9m
cable length);
Easy to read, large dual display with backlit feature;
Simultaneously displays % moisture of wood or material being tested and Air Temperature, IR
Temperature, or Humidity
Designed with IR design to measure non-contact surface temperature; 8:1 distance to
spot ratio with 0.95 fixed emissivity
Built-in Humidity/Temperature probe measures Relative Humidity,
Air Temperature plus Grains Per Pound (GPP) and Dew Point (DP)
Ambient and Surface Vapor Pressure
Automatic calculation of differential Temperature (IR -
DP) Min/Max and Data Hold
20 point internal memory
Auto power off and low battery indication
Battery Replacement
1.
Turn off the meter.
2.
Remove one Philips head screw and lift off the rear battery cover.
3.
Replace the 9V battery.
4.
Secure the rear battery cover.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection sites,
the retail store where the batteries were purchased, or wherever batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end‐of‐life devices
to a designated collection point for the disposal of electrical and electronic equipment.
Other Battery Safety Reminders
o
Never dispose of batteries in a fire. Batteries may explode or leak.
o
Never mix battery types. Always install new batteries of the same type.
