Manual Measurement
1. Pull and hold the trigger after aiming at the target. The SCAN icon
will flash indicating that the target object temperature is being
measured. The measurement result will be updated on the LCD.
2. Release the trigger, the SCAN icon disappears, and the HOLD icon
appears, indicating that the measurement has been stopped and the
last measured value is held.
Lock Measurement
1. In the HOLD interface, press the SET button for 3s to enter the lock
measurement setting interface, and turn on/off the lock
measurement by pressing the
or
button. When the lock
measurement is turned on, short press the LOG button to perform
the time setting “00:00” for the lock measurement. At this time, the
selected time position flashes, and the time value can be adjusted by
pressing the
or
button. Set the time to "00:00" to turn off
timing function.
