6
Bottom interface
13
PD Powered test port (detect whether the power output of the PoE switch pins is normal.)
Note: Receiver port continuity detection only supports the local end, does not support the remote end. Emitter can
support the near end, middle end and far end port detection.
3.
Operation
3.1
Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery cabin should be
disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be well connected.
When the battery icon is full or the charge indicator turns off automatically, indicate the battery charging is
completed.
Notice: Please use the original adaptor and connected cable of the device!
3.2
Auto power off function
The meter can set 10-120 minutes auto power off, or close the auto power off function. Can set power off time in
Setting function.
If you don’t press key, the meter will start the auto power off. If you press the key, the meter will retime. The Auto
power off is off by default.
3.3
OSD Menu
Press key to choose the function, the Icon of screen means has menu interfaces. Select the
Function icon, then click the key to enter the function.
