Triple S 1500 XL, Operating & Maintenance Instructions

Page: 20 / 20

1. TO WHOM EXTENDED AND DURATION OF ITEMS COVERED
This warranty extends to the original consumer purchaser from the date it
was purchased and for the items and periods as follows:
Ten (10) years parts, One (1) year labor - Aluminum Base Casting
Five (5) years parts, One (1) year labor - AC Motor and Gear Unit (except
motor switches, capacitors and flex couplings which have a one (1) year
warranty.
Three (3) years parts, One (1) year labor - DC Motors (except carbon
brushes, rectifiers and varistors which have a one (1) year warranty.).
One (1) year parts and labor - All other components except wear items
excluded below.
2. PARTS NOT COVERED BY WARRANTY
Certain parts of the SSS XL Floor Machine require replacement in the or-
dinary course of use due to normal wear by reason of their characteristics.
This warranty does not cover the following normal wear items:
SSS-17 XL, 17 XL CS, 20XL, 17 DS XL & 20 DS XL MODELS:
Part Number Part Name
SSS-1500 XL & 2000 XL:
3. EXCEPTIONS AND EXCLUSIONS FROM WARRANTY
The SSS XL Floor Machine is required to be used on electric current as
indicated on the nameplate. Otherwise damage, defects, malfunctions or
other failures of the SSS XL Floor Machine arising from use on electric
current not as indicated are excepted and excluded from this warranty.
Defects, malfunctions, failure or damage of the SSS XL Floor Machine
caused by improper, unreasonable or negligent use or abuse while in the
possession of the consumer are likewise excluded from this warranty.
4. PROCEDURE TO BE TAKEN TO OBTAIN PERFORMANCE
OF WARRANTY
To secure repair of the SSS XL Floor Machine or any warranted parts under
this warranty, the following procedure should be taken: The inoperative SSS
XL Floor Machine or warranted parts, together with satisfactory evidence
of the purchase date, must be delivered with shipping and delivery charges
prepaid to the Dealer from whom purchased.
If you are unable to locate the Dealer, you may write or otherwise com-
municate with
Triple S, 2 Executive Park Drive, Billerica, MA 01862
for instructions before repair service is performed by anyone else. In such
event Triple S will provide either the location of a closely available Triple
S Distributor Service Department or other factory instructions.
Upon compliance with the above procedure, all warranted defects will
be repaired, at no additional charge or costs to the consumer, and the
repaired product returned to the consumer, with all shipping and delivery
charges prepaid.
In following the procedures above set forth PLEASE MAKE CERTAIN
to state the Triple S model, type and serial number as shown on the name
plate of the SSS XL Floor Machine.
REPLACEMENT
In the event of the defect, malfunction or failure of your SSS XL Floor
Machine or any warranted part to conform with this warranty, the manu-
facturer may at its sole option and own expense, replace the SSS XL Floor
Machine or any warranted part with another new identical or reasonably
equivalent model or part in lieu of repairing the defect.
5. NO REFUND OF PURCHASE PRICE
Triple S will not, as a matter of its warranty policy, refund the consumer’s
purchase price.
6. WARRANTY REGISTRATION CARD FOR YOUR SSS XL
FLOOR MACHINE AND REQUESTS FOR INFORMATION
Please fill out the warranty registration card accompanying your SSS XL
Floor Machine, giving complete information as requested on the card,
and return to Triple S.
This warranty is in lieu of all other expressed or implied warranties.
9/04
505610
If repair is done on your SSS XL Floor Machine by anyone other than
those below designated as authorized to perform such work without first
having obtained factory instructions, the manufacturer, at its sole option,
may determine that this warranty will not apply and that reimbursement
for such repair will not be made because of the failure to comply with such
factory specified instructions.
SSS XL FLOOR MACHINE
LIMITED WARRANTY
The SSS XL Floor Machine has been manufactured, tested and inspected in accordance with specific engineering requirements, and is
WARRANTED by the manufacturer to be free from defects in workmanship and materials.
This warranty is, however, subject to the following qualifications, conditions and limitations which are set forth to provide you and all users
of the SSS XL Floor Machine with information concerning the duration, extent, availability and applicability of this Limited Warranty, the
procedure to be taken to obtain its performance and other information concerning the manufacturer’s warranty
policy.
503730
502430
509780
509781
501241
501283
Grip, Handle
Power Cord Assembly, 14/3x50’
Wheel, 4”
Wheel, 5”
Bumper, 17”
Bumper, 20”
Grip, Handle
Power Cord Assembly, 14/3x50’
Wheel, 4”
Wheel, 5”
Bumper, Base
Belt, 1500 XL
Belt, 2000 XL
Carbon Brush Motor
Bumper, Caster Housing - 2000 XL
Caster - 2000 XL
503730
502430
509780
509781
501283
903001
903005
500903
501285
509785