by
painkare.triowave.co
|
Page 5
Step-by-Step Guide
Step 1.
Charge the PainKARE device until the
green light on (About 3 hours). Each fully
charging will support 20 hour treatment.
Set up the device by joining each end of
the device together, and attaching
electrodes as illustrated.
Step 2.
Turn the device power on by pressing
(blue) power button and hold for 3
seconds.
Step 3.
Select placement position, clean the skin and
place the electrodes on. (See ‘How to Make
a Valid Treatment’ section above)
Try a few different placement positions if
no effect takes place, example shown in
pictures (red indicates area of pain,
green dots represent electrode
placement).
