by
painkare.triowave.co
|
Page 3
Step 2: Reducing body impedance
Clean selected skin area to overcome body impedance that blocks tiny biostimulation
waveform being able to penetrate into body:
Taking a shower to well hydrate the skin area.
Or applying abrasive conductive gel to rub firmly on the skin and then rinse.
Step 3: Placing the electrode on
Place the electrode with device on selected positions while in moist. Always using
manufacturer suggested electrodes that carries superior impedance and capacitance
supporting tiny biostimulation waveform. Each new electrode is good for 3 to 5 uses.
Step 4: Strongly recommend using compressive band or wrap to affix the device to the body
firmly so that the biostimulation would be able to reach deeper muscle or tendon.
Treatment Time
Acute pain: 30 - 60 minutes for consecutive couple days, or until pain is gone.
Chronic pain: 2 to 4 hours a day for consecutive five days or until pain is 80% improved; then
2 to 4 hours every two or three days. Stop the treatment if pain is gone.
Treatment Tips
T
reatment effect varies due to different physiological or biological reaction from different
user.
Biostimulation is senseless as it is under subsensory. Some user may experience minor tingling.
Sometimes, the effect may take couple hours to emerge because cell repairing takes time.
