XPERT-PRO – Operational Manual
TRINITY
[11]
Programming Mode
The unit is easy user interface for all the field programmable parameters by
pressing
,
and
keys provided. In order to program for all the parameters,
the user should precede upto 18 parameters with the following displays.
Selecting Demand On and Demand Window
DEMAND ON can be selected for the calculation of Demand Power. The unit
supports Demand based on either KVA or KW, for an integration period of 30/15
minutes.
To retrieve the DEMAND ON, precede the following instructions.
In Run Mode, press
key for about five seconds and then the unit displays the
first programmable parameter, DEMAND ON.
1. Press
key again. Immediately ‘P’ starts blinking which shows that the
parameter can now be selected. Select the DEMAND ON by pressing
and
keys according to your desire and then press
key to save the
parameter.
2. Press
key to retrieve the next programmable parameter, DEMAND
WINDOW and then set as above parameter for the following display.
3. After setting the parameter, the unit will reset and return into Run Mode. In
case, your setting is incomplete, precede as above steps 1 and 2.
Selecting Installation Type
The unit supports three types of electrical installation such as 3P4W, 3P3W and
1P2W. So the user should select to either 3P4W or 3P3W or 1P2W accordingly.
To select the Installation Type, precede the following instruction.
1. In Run Mode, press
key for about five seconds and then the unit will
display the first programmable parameter, DEMAND ON. Press
keys to
retrieve the programmable parameter, INSTALLATION TYPE such as shown
below.
DEMAND WINDOW
30
DEMAND ON
KW
