Trinity TR60-2, Operation Instructions Manual

Page: 9 / 10

6.Handle controller frame installation
Handle controller tray
Screw
Frame
Handle controller
frame assembly
Method Of Usage Method Of Usage
Ready for the handle controller tray, steel pole, take out the fixed screws on the
handle controller tray. (Figure 1)
Insert the ball joint of the steel pole to the concave spherical of the handle controller
tray.(figure 2)
( Figure 1) ( Figure 2)
Screw the screws in to the hole which got in step 1 and tighten it, take care the
direction, should be screw it from right to left. (Figure 3)
Prepare the handle controller frame assembly in step 3.(figure 4)
( Figure 3) ( Figure 4)
15 14
Insert the handle controller frame assembly in to the cylindrical fixed pipe, be carefully
that the two groups hole out side and inside should be one to one correspond.(figure5)
Prepare two screws which tighten on two sides (figure 6)
( Figure 5)
Screw the two screws on two sides make it tighten, finish the installation( figure 7)
( Figure 6)
( Figure 7)
7.Controller installation and usage
Insert the handle controller in to the frame (figure 1), the frame can turn left and rig ht
freely. (Figure 2) and the handle controller can swing freely in horizontal direction.
( Figure 1)
( Figure 2) ( Figure 3)
ENLARGE
FIGURE