USAGE INSTRUCTIONS
DRAWER REMOVAL
DRAWER REPLACEMENT
© 2021 TRINITY - 800.985.5506
4
To replace drawer, pull slides out completely. Insert brackets on each side of Drawer Slides into
corresponding slots on the Workbench Slides, making sure they are properly positioned. Once brackets
are inserted into the slots, completely close the drawer to set all slides in their proper positions.
Pull drawer out so that it is almost fully extended. On RIGHT-hand side, pull black release lever UP. On
LEFT-hand side, push black release lever DOWN. While holding levers as instructed, pull drawer
forward until released from the slides attached to Workbench (“Workbench Slides”).
Note:
The slides attached to drawer (“Drawer Slides”) are an integral part of drawer and must be
removed along with drawer itself.
Summary of Contents for TLS-4815
Page 10: ... 2021 TRINITY 800 985 5506 9 ...
