USAGE INSTRUCTIONS
DRAWER REMOVAL
DRAWER REPLACEMENT
Pull the drawer out so that it is almost fully extended. On the RIGHT-hand side, pull the black release
lever UP. On the LEFT-hand side, push the black release lever DOWN. While holding the levers as
instructed, pull the drawer forward until released from the slides attached to the Workbench
(“Workbench Slides”).
Note:
The slides attached to the drawer (“Drawer Slides”) are an integral part of the drawer and must
be removed along with the drawer itself.
To replace the drawer, pull the slides out completely. Insert the brackets on each side of the Drawer
Slides into the corresponding slots on the Workbench Slides, making sure they are properly positioned.
Once the brackets are inserted into the slots, completely close the drawer to set all slides in their
proper positions.
© 2021 TRINITY - 800.985.5506
5
