© 2018 TRINITY - 800.985.5506
INSTALLATION INSTRUCTIONS
–
On Wire Rack
4
Rest WIRE BASKET (A) on top of the CLIPS to ensure proper SLIDE spacing.
•
Note: For ease of installation, do NOT clip the WIRE BASKET (A) into the
LEFT & RIGHT SLIDES (B) & (C) until Step 4.
Position as such:
Identify LEFT & RIGHT SLIDES (B) & (C).
•
Note that the BACK end of each SLIDE (B) & (C) has a black tip and the FRONT
end does NOT.
Place SLIDES (B) & (C) on desired wire shelf. Make sure the FRONT of the SLIDES
(B) & (C) is lined up with the FRONT of the shelf.
Line up the slides along the wires in the wire shelf to ensure they are straight.
Make sure the front edge of the WIRE DRAWER (A) lines up to the edge of the
shelf so they are flush.
B (1)
C (1)
A (1)
STEP 1
STEP 2
CLIPS should be on
the OUTSIDE.
FRONT
BACK
