INSTALLATION INSTRUCTIONS
–
On Wire Rack
With a Phillips screwdriver, secure the SLIDES (B) & (C) to the wire shelf by
putting PLATE SCREWS (E) through the slots and fasten to the RACK
PLATES (D).
D (4)
E (4)
© 2018 TRINITY - 800.985.5506
5
STEP 3
Attach the WIRE BASKET (A) to the clips in the LEFT and RIGHT SLIDES (B) & (C) until it clicks into the
clip.
Installation Suggestion:
With the WIRE BASKET (A) resting on top of the CLIPS, brace the top of the
WIRE BASKET (A) with one hand and, with a rubber mallet, lightly tap each bottom corner of the CLIPS
to secure the WIRE BASKET (A) into the CLIPS.
STEP 4
