SLM
102 – Operational Manual
TRINITY
[32]
Run Mode
In the
Run Mode
, the various parameters measured and calculated by the meter are
displayed on different pages; on a “seven segment LED” display. The pages will
automatically scroll one by one at every 4 to 5 seconds. Press enter key to freeze the
page. Freeze LED indicator will glow. In freeze condition, user can change the page
using up or down key.
The measured or calculated values displayed will auto scale to Mega from Kilo and to
Kilo from value, once the value crosses 10,000. e.g., Once Wh
≥
10000.0, it will show
as 10.000 KWh and if value crosses 10000000 then it shows 1.000000 MWh. If the
user has selected a PT-Ratio (PT-Primary/PT-Secondary)>1.0, voltages will auto
scale to KV.
SLM102 shows measured and calculated values on following different pages:
Run Mode Displays
The first page shows phase to neutral voltage in three phases. The LED indicator
glows onto VOLT and PHASE which indicates that R-Phase, Y-Phase and B-Phase
display in first row, second row and third row respectively.
In case of 3P3W, the page will show phase to phase Voltage with R-phase in first
row and B-phase in third row.
