SLM
102 – Operational Manual
TRINITY
[27]
Resetting Demand Manually / Daily/Monthly
Reset Demand can be specified such as whether the demand will be reset
automatically or manually. In case of automatic reset, there are two options: auto day
(
auto dd
) or auto month (
auto mm
). If user selects auto day then MD will reset for
every 24 hrs at 12:00 a.m. and if user selects auto month then MD will reset on 1st of
every month at 7:00 a.m.
To Reset Demand, proceed the following instructions.
1. In the previous programmable parameter display, press
key till the next
display enters such as shown below.
2. In the above first row, Demand Reset displays along with character ‘
d
’
blinking that shows the parameter is selected. Press
key that reset type,
e.g Auto Daily ‘
A
’ starts blinking. Select the reset types by pressing
and
key and then, press
key to confirm the setting.
3. If the setting is completed, press
key for about four seconds to return into
Run Mode. Otherwise, press
key to enter into next programmable
parameter.
