SELECTING THE POWER VOLTAGE
The implemented wide-range switched mode power supply modules allow an operation from 100Vac to 240Vac. The two
fuses on the primary side are placed inside of the power entry module and filter.
CONNECTING AND STARTING
To install the PHONO PREAMP, select a stable, level surface directly next to the turn table so that the connecting cable to the
tone arm is as short as possible. Avoid placing the appliance in direct sunlight and never place the modules directly next to
radiators or fan heaters.
Protect all supplied parts from humidity and moisture.
Only wire up the components when the device is switched off.
