background image

 

WARRANTY 

 

The warranty period of the Trinity PREAMP is 2 years. 

 

Within the warranty period, any material and production defects will be rectified according to the following conditions: 

 

The warranty period begins with the purchase of the product and only applies to first buyers. 

 

A warranty claim is only valid if defects originating from material or manufacturing defects occur, but not as the result of 
natural wear and tear. In case of justified claims that occur during the warranty time, we will either repair the affected 
component free of charge or replace it at our discretion. In so doing, we are entitled to also supply a successor model in 
the interests of technical progress. Any further claims, in particular compensation damage of any nature, are excluded. 

 

The warranty period is not extended by any work performed during the warranty period, neither for replaced nor repaired 
components. 

 

Any improper handling or interventions by persons not authorized by TRINIT Electronic Design GmbH will render the 
warranty claim null and void. This also applies to damage arising from improper connection or use. 

 

The warranty excludes transportation damage that must be claimed immediately from the forwarding agency (railway, 
post, carrier). Any scratches on the enclosure or other visible defects must be reported to the dealer within 3 days. 

 

The provisions of the German product liability law and comparable foreign regulations remain unaffected, provided they 
are inalienable. We retain the right to make technical changes in the interests of technical progress  

 

 

Summary of Contents for PREAMP






















Reviews: