STEP 4
ASSEMBLY INSTRUCTIONS
STEP 3
D (1)
D
B
A
B
© 2019 TRINITY - 800.985.5506
3
D
A (4)
Place SHELF (D) on its side and slide each BOTTOM POLE (B) through each corner cylinder of
SHELF (D). Make sure corner cylinders are positioned over SLIP SLEEVES (C).
Slowly stand unit upright.
Note:
Level side of SHELF (D) is TOP side (TRINITY logo on the corner cylinders should be right-side up).
Use a rubber mallet, if needed, to secure SHELF (D).
Screw TOP POLES (A) into BOTTOM
POLES (B) in clockwise direction.
Note:
The top of each TOP POLE (A) is
indicated by a BLACK END CAP.
Pole Connectors are pre-installed in
bottom of TOP POLES (A).
