STEP 2
B (4)
C (8)
ASSEMBLY INSTRUCTIONS
STEP 1
B
C
© 2019 TRINITY - 800.985.5506
2
H (2)
I (1)
G (2)
B (4)
B
Screw each CASTER (G & H) into bottom of
each BOTTOM POLE (B). Turn clockwise to
screw in place. Make sure LOCKING CASTERS
(H) are on same side of Kitchen Cart.
Use provided caster wrench to tighten
completely. Failure to do as instructed could
result in caster stem breaking.
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (C) at
desired height
no higher than
3
rd
indentation from the
bottom. Make sure arrow faces up and word “TOP” is
right-side up. Do this for each BOTTOM POLE (B). Make
sure SLIP SLEEVES (C) height is identical for each
BOTTOM POLE (B).
Note that each POLE (A & B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (C) has
raised horizontal lines inside designed to lock in place on
POLE (A & B).
Slide pair of SLIP SLEEVES (C) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (B). DO
NOT place more than one pair on each POLE (A & B) at a
time.
Note: There will be a very small gap in-between two locked SLIP SLEEVES (C)
—
this is normal.
I
H
