User’s Guide | 1200g
7
VIEW AUDIT & CALIBRATION COUNTS
Calibration Counter
Press P key during self-checking, display will show
number of times scale has been calibrated. When
the counter becomes full, it will start over
at 0.
Audit Operation Counter
Press S key during self-checking, display will show
number of audit operations.
Adjusting the Parameters
To access the parameter settings, press the MODE
key during the start up self-checking.
F1 Unt will display. Press the MODE key to move
through the available parameters.
To access the settings in the parameter showing in
the display (such as F1 Unt), press the ENTER key.
The first setting will display (such as “on ct” in the
F1 Unt parameter).
To navigate through the available options for the
setting, press the MODE key (such as “on ct” or oFF
ct”).
To accept the option being displayed, press the
ENTER key. If more than one setting is available in
the parameter, the next setting will display.
To save the settings, press the Enter key as needed
to return to the parameter title (such as F1 Unt),
then press the ESC key.
See the following pages for parameters charts.
Summary of Contents for 1200g High Precision Scale
Page 18: ...NOTES...
Page 19: ...NOTES...
