HN440 USER’S GUIDE
1 8 I n s t a l l a t i o n
Installing DIMMs
1.
Ensure that the system is turned off and that the AC
power cord is unplugged.
2.
Insert the DIMM as shown. The DIMM will only fit one
way round because of the asymmetric notches along the
edge. Use the socket furthest from the processor
(marked MM1) first.
The DIMM is inserted vertically and held in
place by the clips at each end
Removing DIMMS
Press down on the tabs at both ends of the socket at the
same time. This releases the DIMM and lifts it partly out
of the socket.