1
1
2
2
1
1
2
2
1
6
6
2
2
4
4
3
3
1
1
5
5
Trimline Opal
Installation instruction
8
2.6 Restrictor and baffle plate
The restrictor
7
1
and/or baffle plate
2
can be mounted
inside the appliance, at the location of the flue gas duct.
The two retaining screws do not need to be completely
loosened. Loosen the two screws a few turns and hook
the baffle plate and/or restrictor in place..
Chapter
7 Concentric pathways
contains a table that describes
when a baffle plate and/or a restrictor must be fitted. This is
important to ensure the gas fire works correctly.
2.7 Refitting the glass panel
Carefully push the glass panel into place in a straight line
from the front. Install the glazing bars at the bottom and top.
Attach the 8 nuts and
hand-tighten
them initially.
Then tighten the bolts and nuts in the following order:
1
two middle nuts of the bottom glazing bar
2
two middle nuts of the top glazing bar
3
two outer nuts of the bottom glazing bar
4
two outer nuts of the top glazing bar
5
two bolts of the left-hand glazing bar
6
two bolts of the right-hand glazing bar
