1
3
2
1
1
7
7
7
7
2
2
3
3
4
4
5
5
6
6
8
8
8
8
Trimline Opal
Installation instruction
22
11 FITTING THE LED GLOW BED MODULE
11.1 Installation instructions for the LED glow
bed module
The LED glow bed module consists of:
•
LED unit
•
Mains adapter
•
Sealing set
•
Glass panel
•
Glazing bars
Fitting the LED glow bed module consists of two parts:
1 Fit the glass plate in the combustion chamber
2 Fit the LED module to the mounting plate under
the combustion chamber
There must be a 230 VAC wall socket for the LED module
power supply in the vicinity of the appliance.
11.2 Fitting the glass plate
•
Remove the front glass panel, Paragraph
2.3 Removing
the front glass panel.
•
Remove the right-hand part of the grille
1
1
.
•
Remove the right burner
2
by loosening the 2 bolts.
•
Slide the middle part of the grille
3
to the right and then
remove the middle burner
4
.
•
Remove the middle grille
3
from the appliance.
•
Remove the left grille
5
and, if necessary, the left burner
6
.
•
Remove the air guide
2
7
and central sealing plate
8
,
this will create a recess in the bottom of the appliance.
•
Be careful to ensure the seal does not get damaged.
