Triminator Rosin TRP stack Owner'S Manual Download Page 4

ROSIN PRESS SAFETY

IMPORTANT SAFETY INFORMATION 

Triminator rosin presses are designed to extract essential elements from plants containing resin 

glands utilizing heat and pressure and from a variety of herbal material.  Other uses could result 

in injury to the operator or damage to the rosin press and or other property.  Injuries and prop-

erty damage arising from  the use of the Triminator rosin press can be prevented by following 

all instructions in this manual and on the rosin press. The most common hazards are discussed 

below, along with the best way to protect yourself and others.

OPERATE ON FLAT SURFACE

To avoid overturning, only operate the rosin press on flat, hard, durable surfaces. Preferably at 

table height or higher for  best access and operator visibility.  Press is heavy and must be posi-

tioned on a flat surface so as to prevent any accidental upset or tip-over.

AVOID CONTACT WITH HEAT PLATENS

Heat platens can operate at temperatures up to 225 degrees fahrenheit. Prolonged contact can 

cause serious burns. Note red indicator light on power button indicating power ON and platens 

hot.

TURN ELECTRIC POWER OFF AND UNPLUG WHEN NOT OPERATING THE ROSIN PRESS

If you need to leave the rosin press for any reason, always turn electric power off.

MANUAL HYDRAULIC PUMP

Do not place fingers or other body parts in area between heat platens when hand pumping hy-

draulic pump.  Pinching or crushing injuries could result.

AIR OR ELECTRIC HYDRAULIC POWER OPTIONS

Do not place fingers or other body parts in area between heat platens.

Keep BOTH hands on power unit contols at all times when hydraulicly closing press platens.

All rosin press loading and closing functions are to be activated by a single person operator ONLY.

OPERATOR RESPONSIBILITY

Know how to stop and reverse press action immediately in case of emergency. Understand the 

use of all rosin press controls.  Never permit anyone to operate the rosin press without proper 

instruction. Do not let children operate the rosin press.

3

Summary of Contents for Rosin TRP stack

















Reviews: