TriMark e-FOB, Installation Instructions Manual

Page: 8 / 24

Protective Deactivating Security Feature
If a correct code is not entered after 20 button presses, the keypad
enters an inactive mode that disables button recognition for 1
minute. This helps prevent unauthorized access by entering random
codes. There is no button feedback while the system is disabled.
Buzzer Operation
The keypad buzzer chirps once when power is first applied to the
keypad and for each key press during regular use. When an
authorized access code is entered, the system chirps twice to
indicate readiness to unlock doors.
The keypad chirps twice for each button press while in learn mode.
When a new access code is defined, the system chirps 3 times. If an
incorrect code is entered during learn mode, there is a 1-2 second
chirp.
Grab Handle Lighting
The grab handle is lit continuously. The e- PAD is lit with a button
press and while training new access and authority codes.
Doorbell
The doorbell button provides a 0.5 second ground pulse from the
2nd Auxiliary output when pressed. An access code is not necessary
for the doorbell. DIP Switch #8 and #9 of the RF receiver must be
OFF to provide the correct output.
Dome Light Activation
The dome light is toggled on for 5 minutes with a secure (9 / 0)
operation. Repeating the (9 / 0) operation while the dome light is on
will turn the light off.
Emergency Override
To disarm the alarm in case of FOB transmitter and access code
loss:
1. Turn ignition on (apply 12V to yellow wire).
2. Press and hold the push button for 3 seconds.
3. Turn ignition off (remove 12V from yellow wire).
5