Assign New Access Codes
With a valid authority code, an access code can be programmed with the
following instructions.
1. Press the (5 / 6) or (3) button for 5 seconds, the keypad will beep.
The backlighting LED of the keypad will flash indicating the learn
mode.
2. Enter in the 5-digit authority code (see above or page 3 for the
code). Keypad will provide a long beep that will stop after you have
defined an access number.
3. Press and release the button that corresponds to the access
number. For example, press (1 / 2) or (1) button for access #1 and
press (3 / 4) or (2) button for access #2. During this activity you are
defining 1 of 5 (4) access numbers. A subsequent code will be
assigned to this access #. The keypad will provide a confirmation
beep after this single button press.
4. Enter in your new 5-digit access code. The keypad will provide
confirmation beeps.
5. Re-enter new access code. The keypad will provide confirmation
beeps.
Repeat process to assign additional access codes.
Note:
Up to 5 (4) different access codes can be assigned at one time. As
additional access codes are defined, pre-existing access codes are
overwritten. For example, if a new access code is assigned for access #3,
the previous access #3 code is no longer valid.
The following area can be used to document the access code assignments.
Smart LED:
The smart LED indicates system status:
•
Slow flash = Armed
•
Off = Disarmed
•
Fast flash = Alarm activated
8
Access #
User Name
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1
2
3
4
5
Summary of Contents for e-FOB
Page 24: ...UM17 22271 03 12 07 2...
