TriMark 18990-02, Consumers Manual

Page: 5 / 12

Authority code:
Locking Doors With Keypad
Press and hold down the (1 / 2) button for 1-2 seconds. An access
code is not needed to lock the doors.
Unlocking Doors With Keypad and Other Secure
Operations
Entering a valid 5-digit access code enables the keypad. After
entering an access code, the keypad is enabled for 5 seconds and a
sixth button press initiates a secure operation. Entering the correct
access code alone will not initiate a secure operation. The authority
code does not allow for secure operations. It is only used to assign
access codes (see page 4).
The following sequence illustrates how to perform secure operations
with
e- PAD .
•
Enter a valid 5-digit access code (see default access code
information above and page 5). Confirmation beeps indicate
the system is enabled.
•
Press the (3 / 4) button within 5 seconds and all doors will
unlock.
If an unassigned button or no button is pressed while the system is
enabled, the keypad reverts back to disabled state.
e- PAD Operation and Features
The e- PAD is shipped with default Authority and Access codes. When
all necessary wiring connections are made, the e- PAD system will
function as indicated below. Unless the OEM or dealer has changed the
default codes, the Authority and Access codes are as follows:
Access code:
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 / 2 3 / 4 5 / 6 7 / 8 9 / 0
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
7 / 8 7 / 8 7 / 8 7 / 8 7 / 8
3