![background image](http://html1.mh-extra.com/html/chronoremotecontrol/proteco-newpro-ptx433305/proteco-newpro-ptx433305_how-to-set-up_2605804001.webp)
www.ChronoRemoteControl.com
Manual
PROTECO: NEWPRO PTX433305, HIT and TX3
How to set up your new remote control
How does it work:
Your new remote control is not coded.
To make it work properly, you must register the code in your radio receiver (Note:
several new remote controls can be saved on your radio receiver).
Important :
- This description does not necessarily correspond to all brands of remote controls on
the market. It would therefore be preferable to refer to the original manual of your
installation.