SecureMesh
TM
Extender Bridge
Installation Guide
Trilliant Incorporated
page 16 of 26
Completing the installation
Check the connections and close the device
Check to ensure all connections and grounding are
proper, and replace the surge
protector’s cover and the
Ethernet connection cover on the base of the Extender
Bridge. These screws should be tightened to 15 foot-
pounds (20 Newton-meters) of torque.
Secure the Cabling
Use sturdy cable ties or Velcro wraps (not included) to
secure all the cabling against strain, especially if the
installation is subject to high winds.
sturdy cable ties or
Velcro wraps