SecureMesh
TM
Gateway
Installation Guide
Trilliant Incorporated
page 18 of 23
Completing the Installation
•
Check the connections and close the device
Check to ensure all connections and grounding are
proper and replace the surge protection box cover and
the Ethernet cover to the base of the Gateway. These
screws should be tightened to 15 foot-pounds (20
Newton-meters) of torque.
•
Secure the Cabling
Use sturdy cable ties or Velcro wraps (not included) to
secure all the cabling against strain, especially if the
installation is subject to high winds.
sturdy cable ties or
Velcro wraps
