Trilliant Networks SkyPilot SkyConnector, Installation Manual

Page: 16 / 32

Cabling the SkyConnector
Ethernet cabling provides both power and data connectivity for the
SkyConnector.
The section provides instructions for attaching CAT5 cable to the device.
1
Terminate the appropriate grade and length of CAT5 cable with an RJ-45
connector and plug it into the RJ-45 port on the back of the SkyConnector.
Figure 3. Connecting CAT5 cable to the SkyConnector
Make sure the fit is snug so that the cable does not interfere with the weather
gasket.
2
Insert the weather gasket and secure the metal cover.
Press the CAT5 cable into the gasket and insert the gasket into the housing,
taking care not to twist or place unnecessary force on the RJ-45 connector.
Fit the metal cover over the weather gasket and secure it with the four
machine screws supplied in the accessory kit.
SkyPilot SkyConnector Installation 16