©1997-2017 Trikdis
9
www.trikdis.com
Ethernet communicator E10Tv2
3.5
After all parameters are set click Write [F5], to write parameters from
TrikdisConfig program to communicator.
3.6
To create a configuration file which contains current parameters, click Save [F9].
3.7
Disconnect device:
Click Disconnect to disconnect from access level (installer or admin) while communicator is connected
via USB cable to a computer (role indication will be gone from status bar).
If a configuration is done via USB cable, unplug the USB cable; click Disconnect to go back to the first
window.
Installation process
4.1
Connect the communicator to the control panel using wiring diagram below
4.2
(Optional) connect sensors
The communicator contains one input terminal (IN1) for connection of sensors, it can be NC, NO or EOL.
4.3
Connect LAN cable
NC, Normally Closed
NO, Normally Open
EOL, End of line
Communicator E10Tv2
LAN cable
LAN connection jack
Th
is
c
o
n
n
ec
ti
o
n
is
o
p
ti
o
n
al
power +12Vdc
