[english] user manual • trb
1000
[english] user manual • trb
1000
WearIng THe TrB1000
The headset can be worn on left or
right ear. Select any one of the two
rubber gels that fit your ear secure and
comfortably.
Place the headset in the ear such
that the rubber gel holds the headset
against the ear wall and stays
comfortably.
•
•
When headset is not in use, attach the
headset to phone clip or necklace
•
uSIng TrB1000 for HandSfree
oPeraTIonS
Answer Call
On an incoming call, bell will ring from
both phone and headset. Short click
MFB to answer call.
Make Call
To make a call, first dial from phone and
short click MFB to switch call to headset.
Notes: For some phones, after dial-
ing from phone, call will automati-
cally be transferred to headset.
Redial
To redial, double click MFB in idle state.
Notes: For some phones, when
MFB is double clicked, it first
displays the numbers last called or
received. In this case, double click
MFB again to redial. Some phones
allow direct redialing by double
clicking MFB just once.
Voice Dial
Make sure your phone supports voice
dialing and that it is activated and voice
tags have been recorded. To voice dial,
long click MFB in idle handsfree mode.
Follow the instruction message from
phone to complete voice dialing.
Volume Control
Short click (+) or (-) to adjust volume dur-
ing handsfree mode. Beep tones will be
heard at maximum or minimum volume.
Notes: Whether the trb1000 is worn
on left or right ear, the button with
the small dot indicator is the (+)
button.
End Call
To end call first, long click MFB during
‘Talk Mode’. If other party ends the call
first, trb1000 automatically returns to
handsfree standby mode.