888-313-1303
www.trigonsports.com
8
STEP 3 (CONTINUED)
•
Attach each rear section of ‘V’ shape lower frame (#8) to each side of back frame assembly using (2)
each (#6) curved rib frame piece on each side. (Back frame assembly is pre-welded without dolly
assembly attached).
Use 2” length full thread Allen head bolts from hardware bag (Part F) and Lock washer inserts (also
in Part F bag). Allen wrench tool is provided if needed. Use 10” pointed alignment rod if needed to
help align hole with lock washer. Be sure all bolts are secured tight.
STEP 4
WHEEL ASSEMBLY
1. Locate (2) turf tires and mounting plate shown in illustration above. Hardware for the wheel as-
sembly is located in bag ‘Part I’. Wheel shafts are located in ’Part J’.
2. Attach mounting plate to turf tire using tire shaft and washers as shown in pictures above. Be
sure to use washer and tube spacer on each side of wheel shaft to allow wheel shaft to spin freely.
(Figures 2,3) Heavy duty cotter pins will be use to hold wheel shaft in place. Once tire is secured to
mounting plate, attach mounting plate to frame protector assembly by pushing the plate wheel
shaft into wheel protector opening and securing with adjustable lock pin shown in Figure 1.
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
