TRIGEM 386X, Operation Manual

Page: 141 / 173

For additional information on safety and maintenance,
refer to the appropriate sections of this manual’s
introductory chapter.
Stop!
When you remove the main system unit cover, observe the
following precautions:
The power supply cord must be unplugged before the
main system unit cover is removed. (Separe le cordon
d’alimentation et puis enleve le couvercle.)
Once removed, the cover must be replaced and
screwed in position before the power supply cord is
plugged back in. (Apres le couvercle a enleve, visse le
couvercle en place et remettre le cordon d’alimentation.)
Warning;
Installing or removing circuit boards or plugging cables in
with the system AC power turned on can damage your
system.
Figure 7-1. Cover Mounting Screws
Expanding Your System
7-7