ENGLISH
- 14 -
- 15 -
ERECTING THE TENT
1 - Once your tent is correctly positionned, peg
the tent on the ground with the pegs. Be
careful to keep the doors opened. (fig. A)
2 - Take the pump, and start by inflating the 2
middle hoops. (fig. B)
ATTENTION :
During the inflation process the
beam will need to be manually held to ensure it
takes its rounded form. To do this, pull the guy
ropes located on the sleeve.
3 - Inflate the rear beam.
A
B
ATTENTION
:
INFLATE EACH
BEAM TO: 0.344 BARS / 5 PSI.
DO NOT INFLATE ABOVE THESE
VALUES AS THIS MAY RESULT IN
THE BEAMS BURSTING.
Notice TRIGANO DIABLO 6.indd 14
21/09/2018 10:02
