EN
9
databases. To edit the database, go into memory mode by pressing the MEM
button, then press and hold the MEM button for 5 seconds. The screen will
change to highlight the top field which will offer the choice of EDIT, DELETE,
ADD NEW and CANCEL.
To add a new database entry, select ADD NEW, and then press MEM again.
Use the large knob to move the highlighted cursor, and use the small knob to
select characters, numbers or facility type. Pressing the MEM button again
stores the new value, and returns to the normal memory mode.
If you already have entries in the database, you can edit them to change the
details, or you can delete them. To do that, first find the entry that you want
to edit or delete using the normal memory mode. Then, with the entry you
want to change displayed, press and hold the MEM button for 5 seconds. The
choices described earlier will be offered; EDIT, DELETE, ADD NEW or
CANCEL.
If you choose EDIT, and press MEM, the cursor can alter characters, numbers
or facility type in the current entry. Pressing MEM will save that changed
entry. If you choose DELETE, and press MEM, the current entry will be deleted.
If you get this far and realise that you did not want to change the database at
all, select CANCEL and then press MEM; you will be returned to the normal
memory mode.
Saving and Loading the Frequency Database
The frequency database entries you have made can be saved to a USB memory
stick, or you can load a database from a USB stick. To load or save to USB, you
need to put the USB memory stick into the radio before you switch on. When
the radio detects the USB device it will offer to save or load your database. If
there are data entries already on the radio you will be offered the choice to
replace the whole database, or add entries from the USB stick. Similarly if
Summary of Contents for TX56
Page 2: ...This page intentionally left blank ...
Page 14: ...EN 12 ...
Page 40: ...This page intentionally left blank ...