6
Setting up a DMX Serial Data Link:
Master/Slave Fixture Linking:
1.
Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin
connector of the first fixture.
2.
Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
Then, proceed to connect from the output as stated above to the input of the following fixture
and so on.
Operating Modes:
You can use the unit in either a standalone mode or a master/slave configuration; there are 4
modes to choose from:
• Program Mode - Choose a static color, color show, color fade show, or color cycle. The speed of
the show is adjustable. You can also have the unit strobe in this mode.
• Master/Slave Mode- Using the Master unit chooses your desired mode or program and connects
the
“
Slave
”
unit or units, All slaves will now follow the “Master” unit. But only one master.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller
Product overview:
(Diagram I)
