505TT-US-W
www.tricklestar.com
©
TrickleStar
Program Timer
Up to 8 ON/OFF switches can be configured. You can choose to
make the ON/OFF switching identical for all weekdays, individual
weekdays or groups of days as listed in the following table
For each ON time and each OFF time the Day, Hours and Minutes
must be set.
To enter Timer Mode and program the Timer:
1.
Press the ‘PROG’ button to set the first ON program time.
“ON” and the Number “1” appears in the lower left section of
the display.
2.
Press the ‘DAY’ button to choose the required day or block of
days as indicated in Table 1.
3.
Press the ‘HOUR’ button to set the hours
4.
Press the ‘MIN’ button to set the minutes
5.
Press ‘PROG’ button to set the first OFF program time. “OFF”
and the number “1” appears in the display.
6.
Press the ‘DAY’ button to choose day to switch OFF. If you
have chosen a group of days for ON you should choose the
same group of days for OFF.
7.
Press the ‘HOUR’ button to set the hours
8.
Press the ‘MINUTES’ button to set the minutes
9.
Repeat 1-8 if more ON/OFF times is to be set.
10. When you have set the required On Off settings, press the
‘CLOCK’ button to return the display to the clock.
The timer is now ready to operate.
You can check the settings you have programmed by pressing the
‘PROG’ button repeatedly – each setting will appear on the screen.
Random On/Off
The Random On/Off feature can be used for security purposes by
switching ON and OFF light to make the home look occupied when
away. When enabled the Control Socket is switch ON and OFF in
a random pattern at least once in every 8 hours.
To switch between Random On/Off mode and normal Timer Mode
press the ‘DAY’ and ‘HOURS’ buttons simultaneously to enter
Random On/Off mode. An “R” will appear on the display when in
Random On/Off mode.
Manual Override
You can choose permanent Manual ON, permanent Manual OFF,
Auto ON and Auto OFF by pressing the Manual button. Each
mode will be displayed on the screen.
When you choose Auto ON the Control Socket will stay ON until a
Timer OFF event occurs. When you choose Auto OFF the Control
Socket will stay OFF until a Timer ON event occurs.
Countdown
The Countdown feature enables the Control Socket to be switched
OFF after a defined period of time.
To program the countdown:
1.
Press ‘CLOCK’ and ‘PROG” button simultaneously.
2.
Press the ‘HOURS’ and the ‘MIN’ buttons to set the
countdown time. The maximum countdown period is 9 hours
and 59 minutes. The minimum countdown period 1 minute.
3.
Press the ‘MANUAL’ button to turn ON the Control Socket
and start the countdown. Control Socket turns OFF when
countdown timer expires.
Countdown can be pause at anytime by pressing the ‘MANUAL’
button and re-start by press the ‘MANUAL’ button again.
To review Clock press and hold the ‘CLOCK’ button, release the
button to return to the countdown display.
To return to the Timer Mode, press the ‘CLOCK’ and ‘PROG’
buttons simultaneously.
Summertime/Wintertime Switchover
To switch between Wintertime and Summertime press the
‘HOURS’ and ‘MIN’ buttons simultaneously. When in Summertime
a “S” will appear on the display.
NOTE:
The product is per factory default (and after reset) in
wintertime. If you purchase this unit during the summertime, first
switch to summertime before setting the date and clock. Switch to
Summertime by pressing the ‘HOURS’ and ‘MIN’ buttons
simultaneously and “S” will appear on the Display.
MON TUE WED THR FRI SAT SUN
Total no. of
ON/OFF Switches
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
56
8
8
8
8
8
8
8
40
16
42
24
24
24
24
7 46
29
PM
ON
R
7 46
29
PM
ON
S
