Auto Shut-Off
The Auto shut-off feature will operate automatically when the iron is unattended and it is
connected to a mains supply outlet.
Auto Shut-Off In the Horizontal Position.
1. The iron will switch off automatically around 30 Sec if the iron is immobile in the
ironing position (horizontal).
2. The pause symbol will start blinking on the LCD display with a” beep” sound
and the LCD back light will switch off after 5sec.
3. Simply move the iron to set it back on
Auto Shut-Off In the Vertical Position
1. The iron will switch off automatically after about 8 minutes if the iron is left on its heel
rest position (vertical).
2. The pause symbol will start blinking on the LCD display with a” beep” sound
and the LCD back light will switch off after 5 sec.
3. Simply move the iron to set it back on.
Note:
The iron will take about 60 seconds to reach its former soleplate temperature.
After you have finished ironing:
Set the steam control to minimum.
Switch the iron off at the mains and unplug.
Stand the iron on its heel and let the iron cool down fully.
When the iron is cool:
Invert the iron, open the filler and pour away the excess
water from the tank.
When pouring away the water, gently shake the iron to
remove any loose particles from the tank.
Self Cleaning
After the steaming function has been used for 8 hours the ”self clean” icon
will indicate on the LCD Screen.
You should always self clean your iron when you see the icon light up.
1. Half fill the water tank
2. Place the iron upright
3. Connect to the mains supply outlet and turn on the iron.
4. Select the setting to
9
(max) on the LCD screen.
5.
When the setting number stops flashing on the LCD:
Press and hold the
“Temperature up/ ON OFF button” for 2 sec - the LCD display will turn off with a beep sound.
6. Disconnect the iron from the mains supply.
7. Hold the iron horizontally over a sink.
8. Turn and hold the Steam Control/Self-
Cleaning Knob to the Self Clean position.
9. Steam and boiling hot water will drain
from the holes on the soleplate washing
away the scales and minerals that have built
up inside the steam chamber.
10. Gently move the iron back and forth
until the water tank is empty.
11. When Self-Cleaning is complete, release the Steam Control/Self-Cleaning Knob.
12. Rest your steam iron back on its heel rest and allow to fully cool down.
13. Wipe the soleplate with a cold damp cloth.
14. When the iron gets cool completely, store it vertically in a safe place.
Care, Cleaning and Storage
Af
ter Use
7
