Setting the water softener manually (see table)
Set switch to position 1 or
2
The water softener is factory set at position 2.
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must be switched off .
Press and hold the
start/cancel
button and turn the
programme selector dial clockwise till the first pro-
gramme.
Keep the button pressed until the On/Off indicator light
and the
start/cancel
indicator light start flashing.
Release the button. The
end of programme
indicator
light will flash. The number of flashes corresponds to
current level set.
The
end of programme
indicator light might flash 5
times, for example. The flashing is repeated every 5
seconds.
To change the level, press the
start/cancel
button.
Each time the button is pressed the level increases.
(Level 1 follows level 10).
The end of programme indicator light indicates the new
setting.
To memorise the operation, turn the programme se-
lector dial to position off.
Use of dishwasher salt
CAUTION!
Use only special salt suitable for dishwashers.
9
