4. Receiver
VIDEO CAT6 Input: Connect the Video output of the Transmitter using a
CAT6E / 23AWG / solid cable to Video Input of the Receiver.
DDC CAT6 Input: Connect the DDC output of the Transmitter using a CAT6
cable to the DDC input of the Receiver. CAT5 cable can be used if available
with no change in performance.
Power 5V: Connect the 5 volt power supply (included).
HDMI Output: Connect to the HDMI input of your Display.
IR Receiver: Connect the IR receiver cable (included) to this input. Place the
eye in front of the display then use the existing remote control to control the
source equipment. The IR receiver accepts a frequency range from 20 KHz to
60 KHz.
1
2
3
IR
Receiver
3
4
5
1
2
POWER 5V
HDMI OUTPUT
VIDEO
DOC
CAT6 INPUT
3
4
5
Summary of Contents for HXC6IR-RX
Page 7: ...6...
