Tribit BTHA2, Manual

Page: 6 / 52

EN |04
Charging the Earbuds
Put the earbuds back into the charging case, and close its cover to start charging. If the
2 indicators on the leftmost and rightmost of the charging case turn on, the earbuds
are successfully being charged.
It takes about 90 minutes for earbuds to get fully charged.
Charging the Charging Case
The charging case indicator(s) will breathe during charging, and all 4 indicators will
glow sturdily after it is fully charged (in about 120 minutes).
Put the earbuds back into the charging case and hold down its button for 10 seconds
until the charging case indicators flash twice in a turn, which indicates the earbuds
have been reset successfully.
Note: After resetting the earbuds, you need to delete the pairing record on your
device and search for earbuds again for re-connection.
Charging Instruction
Reset
Safety Tips
1. Do not dismantle or modify the earbuds for any reason. Any resulting malfunction
won’t be covered by warranty.
2. Do not deliberately expose the earbuds to liquid because this may cause damages to
the earbuds, invalidating the warranty.
3. Do not expose the earbuds to temperatures above 45°C or below -20°C.
4. This product has a built-in lithium battery. Do not disassemble, hit, squeeze or throw
earbuds into the fire.
Mode Conversion
The FlyBuds C1 Pro earbuds feature 3 working modes: Normal mode, Ambient mode,
and Noise-Canceling mode. You can easily switch between them by clicking the right
earbud 3 times.
When turned on, the earbuds will automatically enter Normal mode.