Tribest MILL-1, Operation Manual, Page: 7 / 20

7
Before you use the device for the first time, please first carefully read through the safety instructions
and operating instructions. Only in this way you will be able to use all functions safely and reliably.
Hold onto these operating instructions for future reference. Pass these operating instructions on to
any subsequent user of the product.
1. Removing the transport guard (see page 9 “Start-up”)
2. Mill feed - Please only use clean and dry grains. You can determine this if the seed crackles
distinctly when you crush it against a hard surface with a spoon. Wet grain can be crushed and
then looks like an oat flake. Please consult the table of mill feed on page 10 when adjusting the
fineness. Please only mill sweet corn for grinding corn. Only process mill feed with the device once.
3. Power supply - Only connect the mill to an alternating current source. Check whether the existing
mains voltage corresponds to the voltage specified on the base plate.
4. Location - The mill housing is made of wood. Wood is a living material that is affected by changes
in temperature and humidity, which may cause it to crack. You can best protect and care for
the housing by not placing the mill close to radiators and not placing it right next to a stove
(steam, moisture).
5. Setting up the mill - During use, place the flour mill on a hard, level base (kitchen countertop).
The slots on the bottom of the device may not be obstructed so that the motor can be ventilated.
BEFORE FIRST USE