Tribe PIXROLL10UTRI, User Manual

Page: 11 / 44

9
PIXROLL10UTRI
3.4 DMX CONFIGURATION
Il PIXROLL10UTRI is equipped with different DMX configuration.
• Press the button MENU to select the DMX configuration: [5 CH] , [6-CH] , [8-CH] , [10-CH] , [17-CH] , [32-CH] , [36 CH].
• Press the button ENTER to save the setting.
• Using UP/DOWN button, select the desired value [001 - 512] .
• Press the button ENTER to confirm.
The tables on page 13 indicate the operating mode and DMX value. The PIXROLL10UTRI is equipped with
3-pole XLR connections.
3.5 DMX ADDRESSING
To able to operate the PIXROLL10UTRI with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the PIXROLL10UTRI. The other functions of the light effect panel
are then automatically assigned to the following addresses.
3.6 PRESET COLOR
This fixture has preprogrammed, static looks that may be triggered without a controller.
• Press the button MENU so many times until shows [C--], and press the button ENTER to confirm.
• Select the desired preset color [C1 - C18] through the buttons UP/DOWN.
• Press ENTER button to confirm.