![background image](http://html1.mh-extra.com/html/triax/tmb-200/tmb-200_manual_1160776009.webp)
Programmable Multiband Amplifier
TMB 200 & TMB 200S
8
awi -july 14
TMB 200-V1
Connect your USB cable between the unit and the keypad. After boot process the display shows
TMB200/Setup and the LED in on. Press a button to access the menus.
Keypad in standby mode (the display shows time and date), press a button to access the menus.
System menu
This allows to:
show firmware version
Firmware 14a23
update the firmware
Firmware upload
go back to factory settings
Factory reset
import or export a configuration
Import/Export
limit the UHF channels at channel 60
LTE 21-60
display the internal temperature
Temp.
set clock and date
Clock Setup
Press the Menu button a while to quit the System Menus.
System menu access.
Keypad in standby mode, press a button to access to
SETTINGS/Config
.
Press the
Menu
button to access to
system menu.
Display shows the firmware version
Settings
/ Config
Factory
Reset
Firmware
14a23
p
p
p
p
p
p
Menu
Firmware
upload
Menu
Firmware
DTMB_00x
Menu
Firmware
wait
Firmware
Complete
Firmware
[ == > ]
p
p
Factory
wait
Menu
To scroll through the other menus, use
or
buttons
.
Firmware update.
Settings
/ Config
Factory
Reset
Firmware
14a23
p
p
p
p
p
p
Menu
Firmware
upload
Menu
Firmware
DTMB_00x
Menu
Firmware
wait
Firmware
Complete
Firmware
[ == > ]
p
p
Factory
wait
Menu
scroll through the menus with button
or
until display shows
Firmware upload
Press
Menu
button to start the function
Select the file name (an USB stick must be connected on the keypad and a DTMB_00x file must
be available in root directory)
Confirm by pressing
Menu
Wait until display shows
Firmware upload
Notes:
side 8 : how to get the System menu.
Press the Menu button a while to quit the System Menus.